Event Configuration >> Schedule Trigger
You can separately configure the schedule for trigger function of the camera by Email, FTP, or NAS.
Select the Enable option for each desired function, and then select a Schedule Profile from the pull-
down list and set up the Interval time.
NOTE:
If the setting value of the NAS Recording Time Per Event option in General Setting is longer
than the Interval time in NAS Schedule, the recorded file will be a continuous video clip.
For example, if you set the NAS Recording Time Per Event as 10 seconds and the Interval as 5
seconds, the recorded file will become a non-stop video clip, since the camera will record a 10-
second video clip within each 5 seconds.
- 54 -