Airlink101 AICN777W User Manual page 41

Network >> Wireless Setting
The camera supports WLAN while you use the wireless network. Select the Enable option to enable this
feature.
- Network ID (SSID): To connect the camera to a specified access point or router, set a SSID for the
camera to correspond with the access point's ESS-ID. To connect the camera to an
Ad-Hoc wireless workgroup, set the same wireless channel and SSID to match the computer's
configuration.
Click Site Survey to display the available wireless networks, so that you can easily connect to one
of the listed wireless networks.
- Wireless Mode: Select the type of wireless communication for the camera: When your camera is
connected to the PC through a router or access point, select Infrastructure; When your camera is
connected to the PC directly, select Ad-Hoc.)
- Channel: Select the appropriate channel from the list.
- Authentication: Select the authentication method to secure the camera from being used by
unauthorized user: Open, Shared-key, WPA-PSK, and WPA2-PSK. The following table explains
the four options:
- 40 -