Airlink101 AICN777W User Manual page 42

Open The default setting of Authentication mode,
which communicates the key across the
network.
Shared- Allow communication only with other
key devices with identical WEP settings.
WPA-PSK/ WPA-PSK/WPA2-PSK is specially designed
WPA2- for the users who do not have access to
PSK network authentication servers. The user
has to manually enter the starting password
in their access point or gateway, as well as
in each PC on the wireless network.
If you select Open or Shared-key as the Authentication mode, you need to complete the following
settings:
Encryption: Select the WEP option to enable the data encryption feature to secure the camera
within the wireless network.
Format: Once you enable the Encryption feature, you need to determine the encryption format by
selecting ASCII or HEX. ASCII format causes each character you type to be interpreted as an
eight-bit value. Hex format causes each pair of characters you type to be interpreted as an eight-
bit value in hexadecimal (base 16) notation.
Key Length: Select the WEP key length you use: 64 bits or 128 bits.
WEP Key 1/2/3/4: Enter the WEP key(s) in the following boxes.
If you select WPA-PSK or WPA2-PSK as the Authentication mode, you need to complete the
following settings:
Encryption: Select TKIP or AES. TKIP (Temporal Key Integrity Protocol) changes the temporal
key every 10,000 packets to insure much greater security than the standard WEP security. AES
(Advanced Encryption Standard) is used to ensure the highest degree of security and authenticity
for digital information.
Pre-Shared Key: This is used to identify each other in the network. Enter the name in the box,
and this name must match the Pre-shared key value in the remote device.
- 41 -