Tripp Lite DWF2655X Owner's Manual page 4

1. Assemble the Wall Plate
M5X10
2a. Mount on Wood Stud Wall
• Make sure that mounting screws are anchored into the center of the studs.
Use of a stud finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.
14-04-248-933327.indb 4
Find and mark the
exact location of
D6 Washer
Anchor Bolt
WARNING
4
1
mounting holes
2
3
Drill pilot holes
Screw the
assembled wall
plate onto the wall
5/6/2014 2:57:52 PM