Tripp Lite B127-008-D Owner's Manual page 9

Standard Extender Installation
Notes:
• Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
• To achieve maximum distance and performance, use 24 AWG solid-wire Cat6
cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher
than 24 AWG will result in shorter extension distance. Higher gauge cabling, such
as 26 AWG, has a more limited transmission capability than lower gauge cabling.
All Tripp Lite N202-Series Cat6 cables use 24 AWG solid-wire cabling.
• The installation diagram shows the B127-004-D4H local transmitter unit. The
B127-002-D2H installation is the same, except there are only two remote ports
and no local monitor port. The B127-008-D Transmitter Unit features eight
remote ports and one local monitor port.
• External power is not required for the B127-100-H or B127-100-H-SR.
2-116-93391C-EN.indd 9 2-116-93391C-EN.indd 9
B127-004-D4H
Extender Kit
OPTIONAL
LOCAL MONITOR
1
Up to 125 ft. (38 m) Cat6 cable at 4K/60 Hz
2
Up to 50 ft. (15 m) Cat6 cable at 4K/60 Hz
3
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz
4
Up to 15 ft. (4.5 m) DisplayPort cable at 4K/60 Hz
B127-100-H
B127-100-H
B127-004-D4H
PC
9
B127-100-H-SR
B127-100-H-SR
2/19/2020 4:11:39 2/19/2020 4:11:39