Advertisement
Universal Series
MODEL
OD-9005PB | OD-1109PB | OD-1209PB | OD-1505PB
INSTALLATION GUIDE
Install Grille
Install Accessories
info@ortechindustries.com
www.ortechindustries.com
Connect Electrical Wiring
Fan with ADD on Humidity Sensor and no wall switch
Fan with ADD on Light Kit and Night Light
Install ceiling material to complete the ceiling construction. Then, cut around the fan housing.
First, insert the sensor plug into the plug base on the power box, and then install the grille
(for fan with motion sensor).
To attach the grille assembly to the fan housing, pinch the grille springs on the sides of the grille
assembly, and position the grille into the housing with the grille springs in the appropriate slots.
Push the grille assembly towards the ceiling to secure.
If need to add accessories function (humidity sensor, motion sensor, speed controller, etc.), put
relevant power box in the place like the diagram on the left, fix it with screws, and insert the
plug from the box into the suitable wire panel. (Motion function also need to change grille with
sensor system). Connect electrical wiring while referring to the wiring diagram above on this
page of the instruction manual.
13376 Comber Way
Surrey BC V3W 5V9
375 Admiral Blvd
Mississauga
,
ON L5T 2N1
Instruction Manual
1-888-543-6473
1-888-541-6474
Advertisement
