File: MBA5-P20 V8 User Guide Version : V1.0 1 Background Description Date Version Author Auditor First parution 01/04/2021 V1.0 3/19 AXEM Technology 11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com...
Version : V1.0 2 Product introduction 2.1 Introduction The MBA5-P20 V8 is a smart mobile PDA integrating many data capture modules including NFC/HF. It fits to many industrial applications to track materials. The device runs under 8.1 Marshmallow Android operating system.
File: MBA5-P20 V8 User Guide Version : V1.0 2.2 Precaution before using battery • Do not leave battery unused for long time, no matter it is in device or inventory. If battery has been used for 6 months already, it should be check for charging function or it should be disposed correctly.
File: MBA5-P20 V8 User Guide Version : V1.0 2.4 Notes Note 1: Using the incorrect type of battery has danger of explosion. Please dispose the used battery according to instructions. Note 2: Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher.
File: MBA5-P20 V8 User Guide Version : V1.0 3 Installation instructions 3.1 Appearance 3.2 Install Micro SD and SIM cards The cards sockets are showing as follows: 3.3 Battery Charging By using USB Type-C contact, the original adaptor should be used for charging the device. Make sure not to use other adaptors to charge the device.
File: MBA5-P20 V8 User Guide Version : V1.0 3.4 Buttons and Function Area Buttons instructions Power Located on left side, press to ON/OFF device. Located on left side, its function can be defined by Function key Side button software. Scanning button located on both sides. There are SCAN button two scanning buttons.
File: MBA5-P20 V8 User Guide Version : V1.0 4 Call function 4.1 Calling numbers 1. Click icon 2. Click number key to input phone numbers. 3. Click icon to call. 4. Click icon to end call. 4.2 Contacts 1. Click contacts to open contacts list.
File: MBA5-P20 V8 User Guide Version : V1.0 5 NFC reader 5.1 Read functionality 1. Click App Center, open “NFC” to read tag information. 2. Place the tag you want to read in front of the RFID antenna as shown below: Photo 3.
File: MBA5-P20 V8 User Guide Version : V1.0 5.2 Write functionality The storage of one tag has 4 zones: RESERVED, EPC, TID and USER. Normally, the default password is 00000000. And TID zone can only be read, other zones can be read and written.
File: MBA5-P20 V8 User Guide Version : V1.0 6 Other functions 6.1 Bluetooth 1. Open “BT Printer” in App Center. 2. In the list of detected devices, click the device that you want to pair. 3. Select printer and click “Print” to start printing contents.
File: MBA5-P20 V8 User Guide Version : V1.0 6.2 GPS 1. Click “GPS” in App Center to open GPS test. 2. Setup GPS parameters to access GPS information. 13/19 AXEM Technology 11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com...
File: MBA5-P20 V8 User Guide Version : V1.0 6.4 Sensor 1. Click “Sensor” in App Center. 2. Setup the sensor by requirements. 15/19 AXEM Technology 11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com...
File: MBA5-P20 V8 User Guide Version : V1.0 6.5 Keyboard 1. Click “Keyboard” in App Center. 2. Setup and test the main value of the device. 16/19 AXEM Technology 11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com...
File: MBA5-P20 V8 User Guide Version : V1.0 6.6 Network 1. Click “Network” in App Center. 2. Test WIFI/Mobile signal by requirements. 17/19 AXEM Technology 11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com...
File: MBA5-P20 V8 User Guide Version : V1.0 6.7 Infrared read-write function (option) 1. Open infrared function in App Center. 2. Click button “Open” to start infrared scanning function. Click “LED” for infrared scanning aim assist. Depending on different application status to compile different commands to realize infrared read and write function.
Need help?
Do you have a question about the MBA5-P20 V8 and is the answer not in the manual?
Questions and answers