Advertisement
Advertisement
Table of Contents
Related Manuals for FITLIGHT TRAINER FLB10002DC
Summary of Contents for FITLIGHT TRAINER FLB10002DC
- Page 1 Quick Guide FITLIGHT Trainer™ User Manual...
- Page 2 Quick Guide REGISTER THE SYSTEM Serial Number REGISTER your FITLIGHT Trainer™ to comply with the Warranty requirements. Please go to www.Fitlighttraining.com and click on the “Register” icon located at the top right of the webpage. Please have your serial number nearby, located on the inside cover of your Charger Case.
- Page 3 Quick Guide NEED TO CREATE 1 OR MORE GROUPS? HERE’S HOW A video of this set-up is also available on the online portal under Tutorials. Select Connect Fitlights HOW TO CREATE 1 GROUP Select Create New Set-up Select the number of groups. In this example, shows 1 group ( A ) of 2 FITLIGHTS™.
- Page 4 Quick Guide FITLIGHTS™ will turn red. Tap each FITLIGHT™ until they turn purple. Once the FITLIGHTS™ have been assigned to the group, select Ok. The system will then ask if you would like to “switch to new setup”. If you select yes, then this current setup will become your new set-up. If you select No the system will then save this set-up for you to use another time (where you can load it by selecting Load Setup).
- Page 5 Quick Guide Once all the groups have been assigned, select “Ok” and save / set-up the group. To set-up more than 1 group, please repeat the previous steps or visit the Group Set-up section located in the User Manual on the online portal. SELECT &...
- Page 6 It is important that the FITLIGHTS™ are positioned in the charging case correctly and are seated in the cradle. Always place the FITLIGHTS™ in the Charger with the Velcro attachment on the FITLIGHT™. When the FITLIGHTS™ are inserted correctly and the system is powered up, the FITLIGHTS™ will be either yellow or red which means the batteries are low.
Need help?
Do you have a question about the TRAINER FLB10002DC and is the answer not in the manual?
Questions and answers