Utilities
• Do not use your phone as a remote controller in
public places where it can interfere with others.
• If you cannot find the manufacturer or model
number matching your device, you can update
the remote controller data base from the WAP
browser.
Setting the phone as a remote controller
1. Align the IrDA port on the phone with the
device.
2. Select ROOM, LIVING, or ETC by using the Left
or Right key, and press the Set soft key.
You can designate the area in which device the
phone will control is located.
3. Select the device you want to control and press
the Select soft key.
4. Select the manufacturer of the device and press
the Select soft key.
5. Scroll to the model number of the item you want
to use by using the Left or Right key.
When the device corresponds to the number you
selected, the device turns on or off.
6. When you are finished, press the Select soft
key.
Using the remote controller
1. Align the IrDA port on the phone with the
device.
2. Select ROOM, LIVING, or ETC by using the Left
or Right key.
158