U-tec Ultraloq U-Bolt WiFi Installation And User Manual page 17

Enter 4-8 digit User Code
and press
Enter the User Code again
and press
Success
4.3 Delete Admin and User
Please reset the lock to Factory Default Mode to delete Admin
and all Users.
How to reset the lock in Standalone Mode?
Please use a Reset Needle to push the Reset Button (at the
bottom of Interior Assembly) for around 3 seconds until you hear
one long beep and two short beeps.
1. How to reset U-Bolt WiFi?
Please note all data will be erased if you reset U-Bolt WiFi to
factory default.
If you are using U-tec App as Owner, please click "Delete and
Reset" to remove the lock from your U-tec Account, then use a
Reset Needle to push the Reset Button (at the bottom of Interior
Assembly) for around 3 seconds until you hear one long beep and
two short beeps.
If U-Bolt WiFi is working as Standalone Mode, please use a Reset
Needle to push the Reset Button (at the bottom of Interior
Assembly) for around 3 seconds until you hear one long beep and
two short beeps.
1 beep with green light,
then steady blue light
2 beeps with green light
All lights o
FAQ
- 16 -