Stanley SL19402-8A Owner's Manual page 10

OPERATING INSTRUCTIONS
2. Liquid waster may be emptied by removing the tank drain.
To empty, turn unit off and remove plug from the wall
receptacle. Remove the drain cap and deposit the liquid
waste conents in a suitable drain. After tank is emplty, return
the drain cap to its original position. To continue use, plug the
cord into the wall receptacle and turn the unit on.
BLOWING OPERATION
WARNING: Always wear safety eyewear complying with ANSI Z87.1 or in Canada CSA Z94.3
when using as a blower.
WARNING: To avoid injury to bystanders, keep them clear of blowing debris.
CAUTION: Wear a dust mask if blowing creates dust which might be inhaled.
CAUTION: To reduce the risk of hearing damage, wear ear protectors when using the vac/blower
for extended hours or when using it in a noisy area.
Your vac contains a blowing feature. It has the capability to blow sawdust and other debris. It can be
used to blow dust and debris out of garages or off patios and driveways. Follow the steps below to
use your vac as a blower.
1. Locate blowing port on your vac.
2. Insert one end of the hose into the blowing port.
3. Turn vac "ON".
10