Subscribe to Our Youtube Channel
Related Manuals for Stanley SL19301-4B
Summary of Contents for Stanley SL19301-4B
- Page 1 4 Gal (15Litre) WET/DRY VACUUM OWNER'S MANUAL IMPORTANT: READ THIS OPERATOR’S MANUAL BEFORE USING!
-
Page 2: Table Of Contents
TABLE OF CONTENTS Specifications Package Contents Safety Information Assembly Care and Maintenance Troubleshooting Exploded View and Parts List Warranty To order replacement bag, filters or parts contact; Customer Service AUS 1300 660 457 NZ 0800 474 876 email: service.group@smga.com.au INTRODUCTION Dear Customer, Thank you for purchasing this wet/dry vacuum which has passed through our extensive quality assurance processes. -
Page 3: Specifications
PRODUCT SPECIFICATIONS Model SL19301-4B Power 240V / 50Hz / 850Watt Motor Single Stage Tank Capacity 15 Litre Hose 1.2 m x 3.2 cm Power cord H05VV-F 2 x 0.75mm² x 3m WARNING: Use only extension cords that are rated for outdoor use. Extension cords in poor condition or that are too small in wire size can pose fire and shock hazards. - Page 4 PACKAGE CONTENTS PART DESCRIPTION Handle Power switch Lid latch Vacuum port Dust tank Blowing port Power cord wrap Accessory holder Casters（To be assembled before use) PART DESCRIPTION Part No. Hose 13-3304 Extension wand 25-1205A Foam filter (Wet) 20-1200A Disposable filter bag 25-1238N Gulper nozzle 13-1588...
-
Page 5: Safety Information
SAFETY INFORMATION IMPORTANT SAFETY INSTRUCTIONS & GROUNDING INSTRUCTIONS When using an electrical appliance, basic precautions should be always followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. DANGER: Never operate this unit when flammable materials or vapors are present because electrical devices produce arcs or sparks that can cause a fire or explosion. - Page 6 SAFETY INFORMATION 24. This appliance is provided with double insulation. Use only identical replacement parts. See instructions for servicing double insulated appliances. 5. Unplug before connecting the hose, nozzle and the like. 26. To reduce the risk of injury from accidental starting, always shut off vacuum and disconnect the power plug from the wall outlet before installing any part or cleaning accessory.
-
Page 7: Assembly
ASSEMBLY INSTALLATION OF HANDLE To install handle 1. Place handle in recess (3) 2. Insert provided screws (1) 3. Use Phillips screwdriver to secure and tighten. OPERATING INSTRUCTIONS WARNING: To reduce the risk of fire or explosion, do not operate this vac in areas with flammable gases, vapors or explosive dust in the air. - Page 8 OPERATING INSTRUCTIONS WET PICK-UP 1. Remove reusable filter and replace it with foam filter when you do wet pickups. 2. This wet/dry vac is equipped with a float mechanism which will rise automatically to cut off the airflow when the liquid in the tank reaches a predetermined level. When this happens, turn off vac, unplug the power cord, and empty the dust tank.
-
Page 9: Care And Maintenance
CARE AND MAINTENANCE FILTER REPLACEMENT WARNING: To reduce the risk of injury from accidental starting, unplug power cord before changing or cleaning filter. The filter should be cleaned often to maintain pe ak vac performance. IMPORTANT: To avoid damage to the impeller and motor, always reinstall the reusable filter before using the vac for dry pickups and always reinstall the foam filter before using the vac for wet pickups. - Page 10 EXPLODED VIEW / PARTS LIST PART DESCRIPTION PART DESCRIPTION Handle Filter cage Top cover Lid latch assembly Dust tank Thermal baffle Vacuum port deflector Power cord Middle Frame Vacuum port Caster dolly Motor Silencer sponge Caster Power switch Motor bottom support Float...
-
Page 11: Warranty
WARRANTY EXPRESS WARRANTY STATEMENT WET/DRY VACUUM You are not required to do anything to register your wet/dry vacuum purchase. Please attach the purchase receipt to this manual and ensure both are kept safe. We hope you enjoy your new wet/dry vacuum , and if you have any problems call customer service on the above phone numbers. - Page 12 WARRANTY COMPLETE WARRANTY STATEMENT – WET/DRY VACUUM As soon as you have purchased the wet/dry vacuum, we recommend that you check to make sure it is intact and that you read the operating instructions carefully before using it. The purchase receipt for this product is to be retained and must be presented if making a claim under the terms of the Smart Marketing Group (SMG) warranty.
-
Page 13: Customer Service
33-35 Lionel Road, Mt. Waverley Victoria 3149, Australia. Stanley® and are trademarks of Stanley Black & Decker, Inc., or its affiliates and are used under license by Alton Industry Ltd. Group The Stanley Black & Decker, Inc. New Britain, CT 06053 U.S.A...
Need help?
Do you have a question about the SL19301-4B and is the answer not in the manual?
Questions and answers