Table of Contents
Advertisement
D. Wall Adapter Power – Power Only When Plugged In
This option allows for all monitor function. If the adapter is removed from the wall power source, the monitor settings
will be saved by the internal monitor battery; however, you won't be able to record.
*North American DC Adapter (DM-PA3) not included in kit. Contact dealer to purchase this accessory.
Installation Steps:
1. Connect the power (red) and ACC (yellow) wires together with the provided T-Tap. To protect the circuit, combine
before the fuse.
2. Plug the monitor into the wall outlet.
WARNING:
Dakota Micro, Inc. is not responsible for any damages caused to your monitor, or yourself, due to the improper installation,
whether it be product sold by DM or product purchased from another source. We recommend contacting a vehicle specialist
before completing work yourself.
Author: MES & CNR
Plug DC adapter into wall outlet*
Revised by: MES & CNR
DM(AG)-H9QD User Manual
Combine red and yellow wires
before the fuse with the T-Tap.
Fuse
Rev: 08/13/21
Page 7 of 16
Advertisement
Table of Contents
