Table of Contents
Advertisement
DM(AG)-H9QD User Manual
C. Hardwire Adapter - Constant Power
Note: This scenario allows the monitor to record even when the ignition is off. This installation is best used when you
need constant power when a vehicle is off, but do not have a 12v Cigarette Adapter port available to use. Hardware is
included.
Connect to ground
Connect to
constant power
Hardwire to
keyed/switched circuit
Installation Steps:
1. Hardwire the ACC (yellow) wire to the vehicle's keyed/switched wire or fuse.
2. Hook the power (red) to a constant power circuit.
3. Hook the ground (black) to a proper ground.
Author: MES & CNR
Revised by: MES & CNR
Rev: 08/13/21
Page 6 of 16
Advertisement
Table of Contents
