Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Rise TKR-M10-16-48
Summary of Contents for Rise TKR-M10-16-48
- Page 1 Quick Installation Guide LED ticker...
- Page 2 Tools Required: ●Cordless drill with phillips bit #1 & #2 ● Standard set of drill bits ● 1/4" nut driver ● 5/16" nut driver ● Torpedo Level ● Chalk line (or a laser level if possible) ● Tape measure Installation Steps: 1.
- Page 3 3. For FLEX chassis only (see Flex Ticker Addendum) 4. Hang ticker section 1 on the cleat rail beginning at rightmost section. a. Connect the power cable to an outlet, but do not turn the ticker’s power switch on. b. Connect the data cable to the building network. Attach Additional Ticker Sections (if applicable): 5.
- Page 4 7. Turn the power switch on. When facing the ticker it will be on the right-hand side. For flex cabinets it will be on the back, for rigid cabinets, it is accessible through the hole at the bottom. Flex Ticker Addendum If your ticker is flexible to conform to a concave or convex surface please see the following additional steps.
- Page 5 2. Only cut links where bends are to be made. Do not make unnecessary cuts in locations where the sign is to be straight. CAUTION: It is extremely important that all metal clippings are removed from the sign housing. Metal chips will cause short circuits and serious damage to the ticker.
- Page 6 After opening to confirm power to the various components look for: ● Blue light coming from the Rise Controller (square black box) ● Orange light on the controller board ● Green light on the power supply ● Red light on back of LED module ●...
Need help?
Do you have a question about the TKR-M10-16-48 and is the answer not in the manual?
Questions and answers