Canon PD-82 Service Manual page 60

CHAPTER 4
Initial check execution
Power ON (Note 1)
Displays "READY"?
Yes
Can a paper pick-up
test be executed ?
Yes
Execute a paper pick-up test
(Note 2)
Occurs paper jam?
No
Delivers paper
normally?
Yes
Displays "operator call"
or "service call"
No
END
Notes: 1. Turn ON the printer or the stand alone mode switch. (To turn ON the stand alone
mode switch, disconnect the power code of the paper deck and remove the rear cover.
Connect the power code again after turning ON the switch.)
2. Select the paper deck pick-up from the external device, or perform the paper pick-up
test described on page 4-8.
4 - 2
No
Displays "operator call"
or "service call"
Yes
No
Refer to the item, "malfunction
status troubleshooting"
Yes
Refer to the item, "paper jams"
No
Refer to the item, "paper
transport troubleshooting"
Yes
Refer to the item, "malfunction
status troubleshooting"
Figure 4-1-1
No
Refer to the item,
"malfunction troubleshooting"