Download Print this page
SEPTENTRIO AsteRx-U Quick Start Manual

SEPTENTRIO AsteRx-U Quick Start Manual

Hide thumbs Also See for AsteRx-U:

Advertisement

Quick Links

5. Basic Monitoring
Is the AsteRx-U tracking satellites?
Select the 'GNSS' tab then 'Satellites
and Signals'
In open sky, the AsteRx-U should
track between 15 and 25 GPS and
Glonass satellites.
The Carrier-to-Noise
Plot for GPS should
show about 3 satellites
with an L1CA above
50 dB-HZ
Is there any interference?
Select the 'GNSS' tab then 'Spectrum'
Click on 'Show table' on the Spectrum
plot then select GPS L2-P(Y). This
frequency band can be vulnerable to
interference.
The small GPS L2 signal at
1227.6 MHz should be
visible. Other spikes or
anomalous activity in this
spectrum may indicate
interference.
For more information:
The memory stick delivered with the AsteRx-U contains:
 AsteRx-U User Manual
 AsteRx-U Firmware Manual
 SBF Reference Guide
You can also consult our webpage or contact our Support Department:
http://www.septentrio.com
support@septentrio.com
AsteRx-U
Quick Start Guide
To set up the AsteRx-U, you will need:
Power supply
WiFi capable device
Antenna
Antenna cable
USB cable

Advertisement

loading
Need help?

Need help?

Do you have a question about the AsteRx-U and is the answer not in the manual?

Questions and answers

Summary of Contents for SEPTENTRIO AsteRx-U

  • Page 1  Click on ‘Show table’ on the Spectrum plot then select GPS L2-P(Y). This frequency band can be vulnerable to To set up the AsteRx-U, you will need: interference.  The small GPS L2 signal at 1227.6 MHz should be visible.
  • Page 2 4a. Connecting to the AsteRx-U over 1. Powering up WiFi  Supply the AsteRx-U with 9-36 VDC via the rear-panel ‘PWR’ socket  If the AsteRx-U doesn’t start up automatically, press the front panel on/off button  Find the AsteRx-U WiFi signal...