Canon CREATIVE PARK Bottlenose Dolphin Assembly Instructions page 3

Bottlenose Dolphin : Assembly Instructions
Add and attach M01 to B01.
Then, attach M01's glue tabs.
Assemble M02 and M03, and attach them to B01.
PAGE03
Add and attach D02 and D03 to D01.
Assemble M01 and TFin-r,
and attach them to B04 and B05.
After assembling D01, D02, and D03, attach D04 on the bottom.
Then, attach D05 and D06 and place the completed dolphin on top.
Curl B03 into a cylindrical
shape and attach to B02.
Curl B04 and B05 respectively
into a semi-conical shapes and
attach them to B03.