Table of Contents
Advertisement
72
Advanced Cooling Module (ACM) LEDs
Advanced Cooling Module (ACM) LEDs
The 2Gb SANbloc Series has two variable speed fans per
advanced cooling module. Each of the two ACMs on the rear
of the 2Gb SANbloc Series enclosure has two fault LEDs
visible from the rear of the enclosure. The LEDs are labeled
"1" and "2" to correspond with the two fans inside the ACM
assembly. These LEDs are normally off and will only be on
when a fault is detected in a fan by the LS Module.
Note: The audible alarm will sound when an error is
detected.
Figure 5-4 Advanced Cooling Module LEDs
Fan1 Fault
1
2
Fan2 Fault
Advertisement
Table of Contents
