CLEANING
•
Cleaning should only be done when the iron is switched off and at room temperature.
•
The iron may be cleaned with a damp cloth and a small amount of liquid detergent if
necessary.
•
Never submerse the soldering iron in liquid or allow any liquid to enter the casing.
•
Do not use any chemicals, abrasives or solvents that could damage the iron.
SPECIFICATION
Model
Voltage
Power Consumption
Temperature
Heating Element
Temperature Sensor
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
MP740070
12V
50W
Integrated Element
MP740071
24V
130W
150-480
o
C
Thermocouple
MP740072
24V
150W
Made in China. PR2 9PP
Man Rev 1.0
Need help?
Do you have a question about the MP740070 and is the answer not in the manual?
Questions and answers