Table of Contents
Advertisement
The purpose of this manual is to assist you in oper-
ating and maintaining your angle broom. Read it
carefully. The information and instructions will help
you achieve years of dependable performance.
These instructions have been compiled from exten-
sive field experience and engineering data. Some
information may be general in nature due to
unknown and varying operating conditions. How-
ever, through experience and these instructions,
you should be able to develop procedures suitable
to your particular situation.
Approximate Weight with SAE J2513 Mounting
Maximum Length at 0° Articulation
Maximum Width at 0° Articulation
Maximum Length at Full Articulation
Maximum Width at Full Articulation
Sweeping Width at 0° Articulation
Sweeping Width at Full Articulation
Range of Hydraulic Flow
Maximum Hydraulic Oil Pressure
4 Introduction
GENERAL INFORMATION
SPECIFICATIONS
BRUSH HEAD
The illustrations and data used in this manual were cur-
rent at the time of printing, but due to possible inline
production changes, your angle broom may vary
slightly in detail. We reserve the right to redesign and
change the angle broom as may be necessary, without
notification.
Throughout this manual, references are made to right
and left directions. These are determined by standing
behind the equipment facing the direction of forward
travel.
AB720-2
852 lbs
71 inches with SAE J2513 mounting
82.5 inches
82.5 inches
82 inches
72 inches
64 inches
12 - 25 gpm
3000 psi
AB840-2
915 lbs
94.5 inches
85.5 inches
93 inches
84 inches
75 inches
12 - 25 gpm
3000 psi
MAN0731 (9/19/2008)
Advertisement
Table of Contents
