Siemens WM16XMH9GB User Manual And Installation Instructions page 48

en Troubleshooting
Fault
The spin result is not
satisfactory. The laun-
dry is too wet/too
damp.
Detergent residue on
the damp washing.
Detergent residue on
the dry laundry.
HomeConnect is not
working correctly.
No connection to the
home network.
48
Cause and troubleshooting
Drain pipe or water outlet hose is blocked.
Clean the drain pipe and the water outlet hose.
▶
Drain pipe or water drain hose is caught or jammed.
Ensure that the drain pipe and water drain hose are
▶
not kinked or trapped.
The unbalanced load detection system has interrupted
the spin cycle because the laundry is unevenly distrib-
uted.
Redistribute the laundry in the drum.
▶
Note: Where possible, mix large and small items in
the drum. Different sized items of laundry distribute
themselves better during the spin cycle.
Start the Spin programme.
▶
Unbalance load detection system is using a reduced
spin speed to eliminate an unbalance.
Redistribute the laundry in the drum.
▶
Note: Where possible, mix large and small items in
the drum. Different sized items of laundry distribute
themselves better during the spin cycle.
Start the Spin programme.
▶
Detergents may contain water-insoluble substances
that deposit on the laundry.
Start the Rinse programme.
▶
Detergents may contain water-insoluble substances
that deposit on the laundry.
Brush out the laundry after washing and drying.
▶
Different causes are possible.
Go to www.home-connect.com.
▶
Wi-Fi is switched off.
→ "Activating Wi-Fi on the appliance", Page 34
▶
Wi-Fi is activated but a connection to your home net-
work cannot be established.
Ensure that the home network is available.
1.
Reconnect the appliance to the home network.
2.
→ "Connecting the appliance to a WLAN home net-
work (Wi-Fi) with WPS function", Page 33
→ "Connecting the appliance to a WLAN home net-
work (Wi-Fi) without WPS function", Page 33