Sony PCG-FX250 Primary User Manual page 63

3 After the notebook has cooled, loosen and remove the screw that secures the
cover of the memory bay on the bottom of your notebook. Use an
appropriate screwdriver.
Removing the memory module cover
4 Touch a metal object (such as the connector panel on the back of your
notebook) to discharge any static electricity.
5 Remove the memory module.
Removing memory module
1 Pull the tabs in the direction of the arrows.
The memory module is released.
6 Tighten the screw on the memory bay cover.
To install a memory module
1 Follow steps 1 to 4 of "To remove a memory module" .
2 Remove the memory module from its packaging.
1
2
Screwdriver
Screw
1
2 Pull the memory module in
the direction of the arrow.
Before you start
63