To remove your notebook from the port replicator
1
Turn off your notebook and the connected peripherals.
2
Pull the levers on each side of the port replicator to disengage the notebook
from the port replicator.
Disengaging notebook from port replicator
3
Lift the notebook away from the port replicator.
Lifting notebook
4
Close the port replicator connector cover on the bottom of your notebook.
✍
It is extremely important to close the port replicator connector cover after removing
your notebook from the port replicator. If the cover is left open, dirt may get inside and
damage the notebook.
Connecting an External Mouse or Keyboard
You can connect an external mouse or keyboard to the optional port replicator
using a similar type PS/2
✍
Before you connect or disconnect the mouse or keyboard, turn off the notebook.
You can only connect one external device at a time. Therefore, it is impossible to
connect both a PS/2 mouse and PS/2 keyboard simultaneously.
Connecting an External Mouse or Keyboard
®
plug or adapter.
Lever
37