Table of Contents
Advertisement
W2E200-HK38-01
Heating-up of the motor when using a variable frequency drive must be
checked by the customer following installation in the end device.
4.3 Connection via terminal strip
4.3.1 Connecting wires to terminals
WARNING
Live terminals and connections even with device
switched off
Electric shock
→ Wait five minutes after disconnecting the voltage at all poles
before opening the device.
; Insert the wires into the terminals, see
Chapter 4.4 Connection diagram.
Item no. 10760-5-9970 · ENU · Change 203512 · Approved 2019-04-29 · Page 7 / 11
Operating instructions
·
·
·
·
·
·
Advertisement
Table of Contents
