Acer AT3720A Service Manual page 42

Hard / Soft Performance
Languages
1.
supported
Starting time
2.
Wake-up behaviour
3.
Stand-by reason
4.
Video and Audio Characteristics
5.
No. PARAMETER ( Channel: 11 )
1 Video output level
2 Video S/N
3 Noise limiting sensitivity
Video amplitude frequency
4
characteristics
5 Audio output level
6 Audio S/N
Scanning mode
6.
Analog TV naming
7.
function
PIP / POP / PBP
8.
function
Multi Picture
36
Czech, Danish, Dutch, English, French, German, Italian, Polish,
Portuguese, Russian, Spanish and Swedish
A correct picture (color, aspect ratio, stability) can be displayed <6
second after power on
The system can be waken up if the button Standby is pressed
(keypad "power" or remote control "power", "0 ~ 9", "CH +/-").
The TV pass in standby mode upon:
• The button "power" is pressed (keypad or remote control).
• On the selected source: no sync signal after 8 minutes.
MIN.
0.8
44
-
1.0 MHz -2.0
2.0 MHz -2.0
3.0 MHz -3.0
3.58 MHz -4.5
140 140
40
Automatic:
Manual:
Automatic:
Manual:
PIP
PIP multiple size
PIP multiple position
POP
POP source
POP (main + sub)
TYP. MAX. UNIT
1.0 1.2 Vp-p
48 - dB
44 49 dBuV
0 +2.0 dB
0 +2.0 dB
-0.5 +1.0 dB
-1.5 +0.5 dB
290 440 mVrms
48 - dB
• Multi-standard, frequency based
• Level range: 55dBuV to 100dBuV
• Abort possible during scanning
process
• Frequency setting is available.
CNI recognition
5 characters
20%, 30%
4 corners
video / graphic (main) by ATV (sub)
1 + 5, 1 + 12
NOTE
1
2
3
4
5
6
Chapter 1