Connecting External Audio/Video Devices; Connecting A Dvd, Vcr Or Audio/Video Equipment - Acer AT3705-DTV Manual

Connecting external audio/video devices

Connecting a DVD, VCR or audio/video equipment

Connect your DVD player, VCR or audio/video equipment using the component port located at the rear of your LCD TV as shown
below.
Source-IN
*If your audio/video device is HDMI-ready, it is recommended that you use the HDMI cable. The HDMI port is located
under the back panel of your TV, as shown above.
**Acer recommends the following priority for connection types: HDMI -> COMPONENT -> S-VIDEO -> COMPOSITE.
***Use the composite cable if your equipment does not have S-video-out.
AV-OUT
*Acer recommends using the SPDIF connector to connect to your AV amplifier for 5.1 surround sound while watching
digital TV programs, since your LCD TV supports Dolby digital sound. For details please see "audio effects" on page 33.
**Composite-out only works with analog broadcasts.
If you need the TV speakers to be turned off when connecting an external AV device, please use the OSD to set
"Internal speaker" to "off".
AV-1,2,3,4 in
*HDMI
Y W R
S
or
DVD
Y W R
Recorder
AV
G B R W R
COMPONENT 1,2,3 in
G B R W R
VCR
Yellow
Y
Red
R
White
W
Blue
B
Green
G
S-video
S
Yellow
Y
Red
R
White
W
15