Turbo Air PRO-26R-N Installation And Operation Manual page 12

INSTALLATION
Ramp Installation For Roll In Models
• Roll In Cabinets placed on the ground require flat and level ground to be set. Also,
to comply with National Sanitation Foundation standards, sealant should be applied
around the perimeter of the models' base.
• Wear safe gloves when carrying the ramps to prevent possible injuries.
SUPPORT
RAMP
Step 1
Place the frontal flange of the Ramp between the Support Ramp and Support Ramp (B).
If the flange gets placed behind the Support Ramp, the door will not close.
Step 2
Center the ramp respect to the Roll In Cabinet. Then the installation process is
completed.
Frontal
Flange
SUPPORT
RAMP (B)
12
RAMP
RAMP