Table of Contents
Advertisement
Available languages
Available languages
ENG
CONTROL PANEL
The control panel for electronic pumps allows to remotely monitor the operation
of the pump and interact with it. It is in fact possible to see when the pump is On
and if there is still liquid to be transferred. Furthermore, you can turn Off and On
the pump with the simple push of a button.
In case of arrest due to end of liquid or overload, you can reset the alarm and
restart the system without having to turn off the power. Moreover, the speed of
the motor can be controlled in order to avoid problems like cavitation and/or
overheating of the pump.
The LED light intensity in the panel is editable choosing among 8 different levels:
every LED on the panel will turn on at the same time and afterwards the light
intensity may be increased or decreased
The panel can be mounted or recessed in a circular hole of diameter 70 mm, or
with external mounting by fixing the provided square box with two screws.
To operate simply connect the pump with the 3m cable supplied or another 4-
wire phone cord and double-ended RJ11 /6.
In the back there is a terminal block that allows you to replicate the buttons and
LEDs of the panel on an external circuit: this allows you to individually control the
features on the dashboard or a device designed by third parties.
8
©
S.p.A.
Advertisement
Table of Contents
