Acer X1230S series Service Manual page 29

Software Installation, Un-installation :
Unzip the "Q-EDID" program files in the same directory.
Install Q-EDID tool : Execute "Install Q-EDID.BAT" to install & register EDID Board into
the computer.
Un-install Q-EDID tool : If you want to uninstall this tool, execute "Uninstall
Q-EDID.BAT", then it will remove EDID Board from the computer.
How to use Download Tool :
(1) Execute EDID Tools V0.16:
1. Run "Q-EDID-V016.exe".
2. Program will appear as below picture.
(2) Write EDID:
• When write D-SUB/DVI EDID:
1. EDID Type Selection : Choose ''EDID 128 Bytes''.
2. Open Files : Click "Open File" to select file "*.DDC"
(Note : If your DDC file name is not like "*.DDC" (e.g. "*.2dc"), please rename it to "*.DDC")
3. Write EDID : Click "Write EDID", and it will execute writing process.
4. While complete, it will show message as ''Write EDID OK...''.
(Note : Check cable connection before write. It will show Write EDID OK even the connection is
not stable.)
29