Table of Contents
Advertisement
24
Adjusts the sharpness of the image.
Sharpness
•
•
H. Position
•
(Horizontal
Position)
•
V. Position
•
(Vertical
Position)
•
Changes the projector's refresh rate to match the frequency
of your computer's graphics card. If you experience a vertical
Frequency
flickering bar in the projected image, use this function to
correct it.
Synchronizes the signal timing of the display with the graphics
Tracking
card. If you experience an unstable or flickering image, use
this function to correct it.
Adjusts the overscan ratio of the HDMI image on screen.
•
HDMI Scan Info
•
•
Choose "On" to enable DLP 3D function.
•
Select this item while using DLP 3D glasses, quad buffer
3D
(NVIDIA/ATI...) graphics card and HQFS format file or DVD
with corresponding SW player.
•
Turns off 3D mode.
If you see a discrete or overlapping image while wearing DLP
3D glasses, you may need to execute "Invert" to get best
3D Sync Invert
match of left/right image sequence to get the correct image
(for DLP 3D).
Choose "On" to display the 3D warning message.
3D Warning
Message
Press
to decrease the sharpness.
Press
to increase the sharpness.
Press
to move the image left.
Press
to move the image right.
Press
to move the image down.
Press
to move the image up.
Auto: Automatically adjusts the overscan ratio by
information from the player.
Underscan: Always no overscan on the HDMI image.
Overscan: Always keep overscan on the HDMI image.
DLP 3D
Off
Advertisement
Table of Contents
