Page 2
ON/OFF Text section with Technical Data, important Safety and Working Hints and description of Symbols...
Page 3
Remove the battery pack before starting any work on the machine. click click...
Page 4
The light must be placed level and stable. The supports can be individually adapted for this. click...click...click... click...
Page 5
For manual retraction, release the lock. max. 3100 mm...
Page 7
If the light is plugged into a AC outlet, the light runs in AC mode. Currently the battery will be charged. This machine must be activated before switching on. Press button, LEDs will light up, machine is ready to start. After 15 minutes of inactivity, the machine goes into sleep mode.
Page 8
For detailed description of ONE-KEY- function, see text section. 77-100 % 55-77 % 32-55 % 10-32 % < 10 %...
Do not dispose of used battery packs in the household Med Level .....................6 h ......6 h ......6 h BS EN 62493:2015 refuse or by burning them. Milwaukee Distributors off er to Low Level ....................10 h ......10 h ......10 h BS EN 61547:2009 retrieve old batteries to protect our environment.
Remove the battery pack from the tool for charging when EurAsian Conformity Mark convenient for you and your job. Milwaukee batteries do not develop a memory when charged after only a partial discharge. It is not necessary to run down the battery pack before placing it on the charger.
Need help?
Do you have a question about the MXF TL and is the answer not in the manual?
Questions and answers