Advertisement
outdoor device composed of more modules,one electricity meter for each module.
Figure 3.14 is a configuration information example for reference.
When editing is completed, enter into the <Configuration Information>-><Installation
Information Import>Page, as shown in Fig. 3.15. Click <Select Document> to select edited
configuration document, then click <Upload> to lead in the configuration document.
Note:
If air conditioner connection information table is prepared and perfected before installing
Hi-Dom system, all steps in 3.4 can be directly skipped and it just needs to lead in the installation
information configuration table from here.
3.6 Issue electricity meter address
Enter into the <Inspection and Debugging>-><Electricity Meter and Gas Meter
Maintenance> page as shown in Fig. 3.16. Before issuing address, the page matching status
displays <Require Matching>, then click <Issue Address> to issue electricity meter address. When
electricity meter address is issued, the page matching status will display <Matching Successful> as
shown in Fig. 3.17, and the system matching is completed.
Fig. 3.15 Installation Information Import Page
Advertisement
