Ignite MARGAY racing K3 Setup Manual page 6

GENERAL MAINTANENCE
Below are a list of items to keep your new kart running at maximum efficiency:
FILL
Change oil after Day 1 break-in, and every 2
hours following with 5w30 synthetic engine
oil (any brand).
Lube between bearing wall and dust jacket
before every run with Tri-Flo or WD-40. Avoid
the use of white lithium grease.
2015 IGNITE K3 SET-UP
BASELINE SET-UP INFORMATION FOR THE IGNITE K3
DRAIN
Ensure front and rear sprockets are aligned
for a smooth chain. Lube chain before every
run with chain lube or a 90w gear oil.
Tension should be loose enough to show 2-3
Inspect and clean clutch components with
brake clean and emery cloth after every 2
teeth when pulled up on.
hours of use.
Page 5 of 29