Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Penguin Manuals
  4. Water Pump
  5. P Series
  6. Installation & maintenance

Penguin P Series Installation & Maintenance

Vertical pump
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
P E N G U I N
P E N G U I N
I n s t a l l a t i o n
Series P
VERTICAL PUMP
Models:
P-1/15
P-1/6
P-1/4
P-1/2
P-1/2-HP
P-3/4
P-3/4HP
P-1
P-1 1/2
P-2
P-3
P-5
P-7 1/2
Materials:
A - CPVC
B - Polypropylene
C - PVDF
1. Motor fan cover with drip shield.
2. Standard TEFC Epoxy coated motor.
3. Air purge plug.
4. One-piece stainless steel rotor shaft assembly. (Optional 316
SS or Titanium shaft available on most models, 1/3hp-15hp)
5. Viton vapor seal/fume barrier assembly.
6. Overflow / vent port.
Introduction
Penguin Pumps are designed to handle a large range of chemicals without difficulty. All wetted parts
constructed of CPVC (A), polypropylene (B), or PVDF (C). Series P pumps have an upper working tem-
perature of 180 (A)/150 (B)/280 (C) degrees, respectively, and thus can handle most corrosive, slurries,
and abrasive solutions. Series P pumps are easy to install and operate, and are virtually maintenance-
free. All pumps have been tested for proper operation before leaving the factory. To obtain optimum
service life, please follow all installation and operation instructions.
&
M a i n t e n a n c e
1
2
3
4
5
6

Advertisement

loading

Related Manuals for Penguin P Series

Summary of Contents for Penguin P Series

  • Page 1 6. Overflow / vent port. Introduction Penguin Pumps are designed to handle a large range of chemicals without difficulty. All wetted parts constructed of CPVC (A), polypropylene (B), or PVDF (C). Series P pumps have an upper working tem- perature of 180 (A)/150 (B)/280 (C) degrees, respectively, and thus can handle most corrosive, slurries, and abrasive solutions.
  • Page 2 Assembly. Many options are available on the factory for proper rotation. A plug is not supplied on motors the P Series motors including single phase-50c, explosion-proof, wired 220/230V. Epoxied motor housings are not available on larger horsepowers to 7 /2, and 575V motors.

  • Page 3: Maintenance Instructions

    Maintenance Instructions NOTE: This manual covers several different configurations of P-Series pumps. Be sure to select the appropriate model number for your pump. MODEL: P-1/2-HP, P-3/4-HP, P-1, P-1 1/2, P-2 MODEL: P3, P5, P7-1/2 DISASSEMBLY DISASSEMBLY 1. Remove the four (4) snap ring screws, being careful not to lose 1.
  • Page 4 P E N G U I N P E N G U I N I n s t a l l a t i o n & M a i n t e n a n c e Maintenance Instructions NOTE: This manual covers several different configurations of P-Series pumps.

  • Page 5: Recommended Installation

    Recommended Installation Liquid Level Liquid Level RESERVOIR Suction Level Flapper Check Valve Flapper Check Valve T-Connection with valve for Suction extension filling up and Discharge line suction line Suction line Flapper Check Valve Flapper Check Valve Suction Head In-Tank Installation Discharge valve Out-Of-Tank Installation...
  • Page 6 P E N G U I N P E N G U I N I n s t a l l a t i o n & M a i n t e n a n c e Spare Parts List and Exploded View Series P Spare Parts List P-1/15 P-1/6...
  • Page 7 P E N G U I N P E N G U I N I n s t a l l a t i o n & M a i n t e n a n c e Spare Parts List and Exploded View Series P Spare Parts List P-1/2-HP P-3/4-HP...
  • Page 8 P E N G U I N P E N G U I N I n s t a l l a t i o n & M a i n t e n a n c e Spare Parts List and Exploded View Series P Spare Parts List P-7 1/2 Item...