Madge Networks CrossFire 8650 Manual To Operation page 5

Declaration of Conformity
We Madge Networks Ltd.
Wexham Springs
Framewood Road
Wexham
Slough, SL3 6PJ
England
declare under our sole responsibility that the products
CrossFire 8650 High-Speed Token-Ring UEM
CrossFire 8651 High-Speed Token-Ring UEM
to which this declaration relates are in conformity with the following standards or other normative
documents
EN 50082-1
EN 61000-3-2
EN 61000-3-3
EN 55022
EN 60950
EN 60825-1
following the provisions of 89/336/EEC Directive and 73/23/EEC Directive.
Modifications
If the device is changed or modified without the express approval of Madge the user may void his or her
authority to operate the equipment.
Safety Notice
Danger: To avoid shock hazard, do not connect or disconnect any cables or perform installation,
maintenance, or reconfiguring of the CrossFire 8650 and 8651 UEMs during an electrical storm.
Caution
Warning: All RJ-45 connectors must be connected only to safety extra low voltage (SELV) circuits
such as a local area network (LAN).
CrossFire 8650/8651 UEM Guide to Operation, DOC-7090 v. 1.0
iii