Table of Contents
Advertisement
ii
Trademarks
Madge and the Madge Logo are trademarks, and in some jurisdictions may be registered trademarks, of
Madge Networks or its affiliated companies.
ClearSight and CrossFire are trademarks, and in some jurisdictions may be registered trademarks, of
Olicom A/S or its affiliated companies.
Other trademarks appearing in this document are the property of their respective owners.
Copyright
Madge Networks reserves the right to modify the information given in this publication without prior
notice. The warranty terms and conditions applicable for your purchase of this product are shipped with
the product.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise,
without the prior written permission of the publisher.
Publication: DOC-7090 v.1.0
Part number: 710001830
© Copyright 1999 Madge Networks.
The intellectual property within the product is proprietary to Madge and its licensors.
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Warning: This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
All rights reserved . No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, without the prior written permission of the publisher.
CLASS 1 LASER PRODUCT
Class 1 levels are not considered hazardous.
CrossFire 8650/8651 UEM Guide to Operation, DOC-7090 v. 1.0
Advertisement
Table of Contents
