Removing the USB/LED/Power/Card Reader Board
1. Remove the upper cover. See "Removing the Upper and Lower Covers" on page 39.
2. Remove the three (3) securing screws as shown.
Step
HDD SKU:
USB/LED/Power
board
SDD SKU:
USB/LED/Power
board
3. Lift the board to expose the USB/LED/Power board to mainboard cable.
52
HDD SKU
Size
M2*3 (NL)
M2*3 (NL)
Quantity
3
4
SSD SKU
Screw Type
Chapter 3