Blue Coat SG510 Series Installation Manual
  1. Manuals
  2. Brands
  3. Blue Coat Manuals
  4. Network Hardware
  5. SG510 Series
  6. Installation manual

Blue Coat SG510 Series Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
Blue Coat
Systems
SG510 Series
Installation Guide
Version: SGOS 4.2.x and 5.1.x

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SG510 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Blue Coat SG510 Series

Summary of Contents for Blue Coat SG510 Series

  • Page 1 ® Blue Coat Systems SG510 Series Installation Guide Version: SGOS 4.2.x and 5.1.x...
  • Page 2 Blue Coat Systems, Inc. All right, title and interest in and to the Software and documentation are and shall remain the exclusive property of Blue Coat Systems, Inc. and its licensors.

  • Page 3: Table Of Contents

    Contents Chapter 1: Unpack and Rack a Blue Coat SG510 Unpacking a SG510....................8 SG510 Front Panel Features..................8 SG510 Back Panel Features ..................9 Mounting the SG510 in an Equipment Rack............10 Rack-Mounting Notes ..................10 Attaching the Cable Management Support............11 Installing the Disk Drives ..................
  • Page 4 The SG510 certificate is no longer valid .............. 80 Resetting the SG510 to Factory Defaults.............. 81 The SG510 Does Not Come Back Up After Rebooting ........83 Appendix A: Specifications General Specifications .................... 85 P/N 231-02833 Blue Coat SG510 Installation Guide page iv...
  • Page 5 Conexión del cable de alimentación..............95 Lasers ........................96 Appendix D: Anhang D: Regulierende Anweisungen Allgemeine Systemvorsichtsmassnahmen ............97 Anschliessen des Stromkabels ................97 Lasers ........................98 Appendix E: Simplified Chinese Regulatory Statements P/N 231-02833 Blue Coat SG510 Installation Guide page v...
  • Page 6 Appendix F: Traditional Chinese Regulatory Statements Index P/N 231-02833 Blue Coat SG510 Installation Guide page vi...

  • Page 7: Chapter 1: Unpack And Rack A Blue Coat Sg510

    Coat Web site at www.bluecoat.com. (Look for WebPower Login under Support.) You can also find tech briefs (technical briefs) on the Blue Coat Web site. If you log on to the SG510 using a Web browser, you can access the online help by clicking the button on the Management Console screens.

  • Page 8: Unpacking A Sg510

    Unpacking a SG510 When you receive and unpack the SG510, verify that the package contains the following items: • Blue Coat SG510 Series Appliance • AC Power cord • Quick Start Guide • Disk drives (up to two) • Null-modem serial cable •...

  • Page 9: Sg510 Back Panel Features

    Two full-duplex, auto-sensing Ethernet network adapter ports supporting 10/100/1000 Base-T connections. • An expansion slot for optional network, bridging, or SSL cards. See Chapter 4: ’Option Cards" for more information about SG510 option cards. P/N 231-02833 Blue Coat SG510 Installation Guide page 9...

  • Page 10: Mounting The Sg510 In An Equipment Rack

    Mounting the SG510 in an Equipment Rack The Blue Coat SG510 is designed to fit into a standard telco-style or four-post cabinet style equipment rack. The SG510 ships with the rack-mounting ears installed. Rack-Mounting Notes Read these notes before rack-mounting the SG510.

  • Page 11: Attaching The Cable Management Support

    Attach the cable management support with a flathead screw Figure 1-4: Attach the Cable Management Support When you attach cables to the system, run them through this clip to keep them from tangling. P/N 231-02833 Blue Coat SG510 Installation Guide page 11...

  • Page 12: Installing The Disk Drives

    Non-removable Non-removable Drive slot 2 Drive slot 1 spacer spacer Figure 1-5: Disk-Drive Slot Arrangement Important: You cannot hot-swap disks in the SG510; you will lose all configuration settings. P/N 231-02833 Blue Coat SG510 Installation Guide page 12...
  • Page 13 Pull the front panel forward and down. Press the push tabs on each side of the front-panel bezel The front panel swings forward and down Figure 1-6: Access the Disk Drive Slots P/N 231-02833 Blue Coat SG510 Installation Guide page 13...
  • Page 14 Use the lever to slide the disk-drive carrier into the first open slot (Slot 1, second from left). Important: Always insert disk drives from left to right. If you have only one disk drive, install it into drive Slot 1. P/N 231-02833 Blue Coat SG510 Installation Guide page 14...
  • Page 15 If you need to remove a drive, press the button on the right side of the disk-drive carrier to release the lever. Pull the lever towards you to slide the carrier out of the slot. P/N 231-02833 Blue Coat SG510 Installation Guide page 15...

  • Page 16: Connecting The Cables

    Verify that the system has powered on successfully. See the four system states described below and the corresponding states of the Power LED. Power LED • No color: the SG510 is powered off or non-functional P/N 231-02833 Blue Coat SG510 Installation Guide page 16...
  • Page 17 LEDs (2) Figure 1-11: Verify Successful Power On The SG510 comes with all software installed. To configure a SG510 for the first time go to “Configure a SG510” on page 19. P/N 231-02833 Blue Coat SG510 Installation Guide page 17...
  • Page 18 P/N 231-02833 Blue Coat SG510 Installation Guide page 18...

  • Page 19: Chapter 2: Configure A Sg510

    Use a Web browser. To use this method for SGOS 5.1.1.x and later, you must first configure the IP address of the SG510 using the serial console or front panel. Blue Coat recommends using the Web browser configuration method if you are running SGOS 5.1.1.x or later.
  • Page 20 “Logging on to the SG510” on page 62 for more information. Refer to the Blue Coat ProxySG Configuration and Management Guide Suite for information on how to fully configure the software. Download the Blue Coat ProxySG Configuration and Management Guide Suite, available on the Blue Coat Web site at www.bluecoat.com.

  • Page 21: Section A: Configuring The Sg510 With The Front Panel Features

    If the SG510 is powered on, but the front-panel LCD is off, press any front-panel control button (see Figure 2-1) to turn the LCD back on. After the LCD illuminates, the front-panel control buttons return to their normal behavior. P/N 231-02833 Blue Coat SG510 Installation Guide page 21...

  • Page 22: System Lcd And Modes

    LCD through Down the six networking parameters (IP Address, Subnet mask, Gateway address, DNS address, Console Password, and Enable Password). In Configuration mode, the cursor is an underscore in the LCD. P/N 231-02833 Blue Coat SG510 Installation Guide page 22...
  • Page 23 Important: The system automatically exits Edit mode, without saving parameter configurations, if no activity is detected for 20 seconds. In Edit mode, the cursor is a blinking box in the LCD. P/N 231-02833 Blue Coat SG510 Installation Guide page 23...

  • Page 24: Sg510 Control Buttons

    Menu Left and Right Arrow When you push the arrow buttons in Left Right Buttons Edit mode, the cursor moves back and forth over the configurable settings of the parameter displayed. P/N 231-02833 Blue Coat SG510 Installation Guide page 24...

  • Page 25: Using The Front Panel To Configure Basic Network Settings

    The IP address parameter appears in the LCD, and the cursor appears as an underscore. Press the button again to enter Edit mode. Enter The cursor changes to a blinking box. P/N 231-02833 Blue Coat SG510 Installation Guide page 25...
  • Page 26 67). Press the button to enter Edit mode (if necessary) and follow Steps 3 and Enter 4 to secure the serial port. Press the button to return to Status mode. Menu P/N 231-02833 Blue Coat SG510 Installation Guide page 26...
  • Page 27 Initial network configuration is now complete. The LCD cycles between CPU Utilization and Freshness statistics. P/N 231-02833 Blue Coat SG510 Installation Guide page 27...

  • Page 28: Section B: Placing The Sg510 Into The Network

    SG510 into your own network, consult with your IT administrator. For less common network configurations, such as using WCCP or a Layer 4 switch, refer to the Blue Coat ProxySG Configuration and Management Guide Suite.

  • Page 29: Section C: Initial Configuration With A Web Browser

    If the SG510 is running 5.1.1.x or later, you must configure the SG510 IP address, subnet mask, gateway, and DNS address using the front panel or serial console before accessing the Setup Wizard. P/N 231-02833 Blue Coat SG510 Installation Guide page 29...

  • Page 30: Where To Go Next

    SG510 or you must have created a static route to one of these addresses): https://10.0.0.254:8083/ https://172.16.0.254:8083/ https://192.168.0.254:8083/ https://192.168.1.254:8083/ Note: If you are using an inline bridging deployment, enter the following URL into your browser: https://proxysg.bluecoat.com:8083/ P/N 231-02833 Blue Coat SG510 Installation Guide page 30...
  • Page 31 Note: If you want to have the password hashed for you, use the remote initial configuration method (see Section E:Configuring the SG510 from a Remote Location). P/N 231-02833 Blue Coat SG510 Installation Guide page 31...
  • Page 32 SG510; you must then create policies to explicitly deny proxied transactions on a case-by-case basis. • Selecting prohibits proxied transactions from passing through the Deny SG510; you must then create policies to explicitly grant proxied transactions on a case-by-case basis. P/N 231-02833 Blue Coat SG510 Installation Guide page 32...
  • Page 33 For more information about this option, refer to Volume 7: The Visual Policy Manager and Advanced Policy Tasks of the Blue Coat ProxySG Configuration and Management Guide Suite. Figure 2-4: Initial Configuration Page—Default Policy for Proxied Services (Optional) Secure the serial port: select...
  • Page 34 When you have set the basic networking parameters and connected the SG510 to the network, you are ready to fully configure the appliance. For a list of all CLI commands, refer to the Blue Coat ProxySG Command Line Interface Reference. For information about configuring and administering the SG510 (including...
  • Page 35 Blue Coat ProxySG Configuration and Management Guide Suite. 5.1.1.x—To Configure the SG510 Using the Setup Wizard Before starting this procedure, ensure that you have met all requirements described in“Requirements” on page 29. Place the SG510 into the network.
  • Page 36 (Optional) Configure the Application Delivery Network (ADN) settings. The ADN settings optimize the delivery of applications over the WAN. Select the traffic types that the appliance should intercept. Set the initial policy. P/N 231-02833 Blue Coat SG510 Installation Guide page 36...
  • Page 37 The Web-based wizard is available only for initial appliance configuration (or following a reset to factory defaults). After you click during the final step, the wizard is no longer available. Configure P/N 231-02833 Blue Coat SG510 Installation Guide page 37...

  • Page 38: Section D: Initial Configuration Using A Direct Serial Port Connection

    “4.2.2.x—Configuring the SG510 Using a Direct Serial Port Connection:” page 39. • If your SG510 is running 5.1.1.x, complete the procedure described in “5.1.1.x—Configuring the SG510 Using a Direct Serial Port Connection:” page 47. P/N 231-02833 Blue Coat SG510 Installation Guide page 38...
  • Page 39 Create and name a new connection (either a COM or TCP/IP), and verify that the port is set using the parameters described in the table above. Power on the SG510 and wait for the system to finish booting. P/N 231-02833 Blue Coat SG510 Installation Guide page 39...
  • Page 40 Note: If you enter YES to configure a bridge, you must also configure at least one bridge port and associate a network interface with it. P/N 231-02833 Blue Coat SG510 Installation Guide page 40...
  • Page 41 Would you like to change any of them? Y/N [No] No Figure 2-8: Initial Setup—Page One On page 2, enter a console username and a console and enable password. A default username (admin) is already in place—you can change it here. P/N 231-02833 Blue Coat SG510 Installation Guide page 41...
  • Page 42 Console Access tab in the Management Console. You can add or remove IP addresses or you can enable or disable workstation restrictions. For details, refer to Volume 5: Securing the ProxySG in the Blue Coat ProxySG Configuration and Management Guide Suite. P/N 231-02833 Blue Coat SG510 Installation Guide...
  • Page 43 If the setup password is lost, assistance from Blue Coat Systems will be required and all system configuration may be lost. It is recommended that this password be stored in a physically secure location.
  • Page 44 WARNING: The console account can currently be used to log in from any workstation. Would you like to restrict access to an authorized workstation? Y/N [Yes] Yes Authorized workstation [0.0.0.0]:10.2.33.1 Figure 2-11: Initial Setup—Page Three P/N 231-02833 Blue Coat SG510 Installation Guide page 44...
  • Page 45 Would you like to setup the forwarding host now? Y/N [No] Figure 2-12: Initial Setup—Page Four P/N 231-02833 Blue Coat SG510 Installation Guide page 45...
  • Page 46 IP address that you configured for this SG510 in [IP Address] Step 4. “Logging on to the SG510 Management Console” on page 62 for more information about accessing the SG510. P/N 231-02833 Blue Coat SG510 Installation Guide page 46...
  • Page 47 Power on the SG510 and wait for the system to finish booting. P/N 231-02833 Blue Coat SG510 Installation Guide page 47...
  • Page 48 Welcome to the ProxySG Appliance Setup Console appears, the system is ready for the first-time network configuration. On page 1, enter the interface number, IP address, IP subnet mask, IP gateway, and DNS server parameters. P/N 231-02833 Blue Coat SG510 Installation Guide page 48...
  • Page 49 Note that this serial console initial configuration method contains a subset of the configuration options available in the Web Setup Wizard. Figure 2-16: Initial Setup—Page Two P/N 231-02833 Blue Coat SG510 Installation Guide page 49...
  • Page 50 This can pose a security risk because anyone with access to the appliance can reconfigure the SG510 settings. This optional step sets a password for the serial console setup, allowing only authorized personnel the ability to reconfigure the appliance. P/N 231-02833 Blue Coat SG510 Installation Guide page 50...
  • Page 51 If the setup password is lost, assistance from Blue Coat Systems will be required and all system configuration may be lost. It is recommended that this password be stored in a physically secure location.
  • Page 52 Page 5 displays. This page explains how to access the SG510 from an SSH Client or with a Web browser. See “Logging on to the SG510” on page 62 for more information. P/N 231-02833 Blue Coat SG510 Installation Guide page 52...
  • Page 53 When you have set the basic networking parameters and connected the SG510 to the network, you are ready to fully configure the appliance. For a list of all CLI commands, refer to the Blue Coat ProxySG Command Line Interface Reference. For P/N 231-02833...
  • Page 54 SG510 (including information about setting policies that will explicitly grant or deny proxied transactions), refer to the Blue Coat ProxySG Configuration and Management Guide Suite. P/N 231-02833 Blue Coat SG510 Installation Guide page 54...

  • Page 55: Section E: Configuring The Sg510 From A Remote Location

    Perform this procedure if you plan to enter configuration parameters for the SG510 from a remote location and then have an on-site administrator place the SG510 into the network and complete the configuration. P/N 231-02833 Blue Coat SG510 Installation Guide page 55...
  • Page 56 Enter the following URL into your browser: http://download.bluecoat.com/initial-remote/initial-remote.html The SG510 Initial Configuration Setup for Remote Appliances window opens. Enter the network parameters for the remote appliance. Figure 2-21: Remote Initial Configuration Page—Network Parameters P/N 231-02833 Blue Coat SG510 Installation Guide page 56...
  • Page 57 If you enter the passwords in hashed format, select password is in hashed for each password. A hashed password must be in the BSD MD5 format password format. Figure 2-22: Remote Initial Configuration Page—Console Account Username and Password P/N 231-02833 Blue Coat SG510 Installation Guide page 57...
  • Page 58 For more information about this option, refer to Volume 7: The Visual Policy Manager and Advanced Policy Tasks of the Blue Coat ProxySG Configuration and Management Guide Suite. Figure 2-23: Remote Initial Configuration Page—Default Policy for Proxied Services...

  • Page 59: Step Two-Complete The Configuration

    Place the SG510 into your network using one of the following methods: • Change the IP address of the PC so that it is on one of the subnets the appliance uses for initial configuration: https://10.0.0.254:8083/ P/N 231-02833 Blue Coat SG510 Installation Guide page 59...
  • Page 60 Web page (and see a browser error page), or you see a Blue Coat Web page that describes some of the potential problems you might have. Fix...
  • Page 61 When you have set the basic networking parameters and connected the SG510 to the network, you are ready to fully configure the appliance. For a list of all CLI commands, refer to the Blue Coat ProxySG Command Line Interface Reference. For information about configuring and administering the SG510 (including...

  • Page 62: Section F: Logging On To The Sg510

    Use a direct serial connection or an SSH Client to access the SG510 command-line interface (CLI). Important: Blue Coat recommends that you set up a secure SSL connection for greater security. For instructions, refer to Volume 5: Securing the ProxySG in the Blue Coat ProxySG Configuration and Management Guide Suite.
  • Page 63 When you have set the basic networking parameters and connected the SG510 to the network, you are ready to fully configure the appliance. Refer to the Blue Coat ProxySG Configuration and Management Guide Suite for information about configuring and administering the SG510.

  • Page 64: Logging On To The Sg510 Cli

    SSH client, such as PuTTY or F-Secure. To connect to the SG510 CLI using Telnet, you must first enable the Telnet-Console. Refer to the Volume 3: Proxies and Proxy Services of the Blue Coat ProxySG Configuration and Management Guide Suite. Note:...
  • Page 65 SGOS# configure terminal Enter configuration commands, one per line. End with CTRL-Z. SGOS#(config) Refer to the Blue Coat ProxySG Configuration and Management Guide Suite for information about configuring and administering the ProxySG. Using an SSH Client to Connect to the SG510 CLI Start the ProxySG.
  • Page 66 ProxySG settings: SGOS#configure terminal [Enter configuration commands, one per line. End with CTRL-Z.] SGOS#(config) Refer to the Blue Coat ProxySG Configuration and Management Guide Suite for information about configuring and administering the ProxySG. P/N 231-02833 Blue Coat SG510 Installation Guide...

  • Page 67: Section G: Configuring A Front-Panel Pin

    Note: The front-panel PIN commands are hidden commands. If you enter the commands listed above and receive an unrecognized command message, enter the following command and try again: SGOS#(config) reveal-advanced all P/N 231-02833 Blue Coat SG510 Installation Guide page 67...

  • Page 68: Section H: Configuring The Front-Panel Lcd Behavior

    LCD behavior. SGOS#(config) front-panel SGOS#(config front-panel) SGOS#(config front-panel) backlight flash SGOS#(config front-panel) backlight state {off | on | timeout} SGOS#(config front-panel) backlight timeout seconds P/N 231-02833 Blue Coat SG510 Installation Guide page 68...
  • Page 69 Specifies the number of seconds that the LCD timeout seconds remains on without activity. The backlight state timeout command specifies an LCD timeout; this command specifies the number of seconds before timeout occurs. P/N 231-02833 Blue Coat SG510 Installation Guide page 69...
  • Page 70 P/N 231-02833 Blue Coat SG510 Installation Guide page 70...

  • Page 71: Chapter 3: Removing And Installing Disk Drives

    Chapter 3: Removing and Installing Disk Drives This chapter describes how to remove and install disk drives. Important: The SG510 only supports disk-drive upgrade packages obtained from Blue Coat Systems, Inc. Important: You cannot hot-swap disks in the SG510; you will lose all configuration settings.

  • Page 72: Removing A Disk Drive

    Figure 3-27: Access the Disk Drive Slots On the disk drive to be removed, gently press the button on the right side of the disk-drive carrier to release the disk lever. P/N 231-02833 Blue Coat SG510 Installation Guide page 72...

  • Page 73: Installing A New Disk Drive

    When the disk meets the drive slot wall, gently rotate the lever towards the button until it latches, seating the drive firmly in place. P/N 231-02833 Blue Coat SG510 Installation Guide page 73...
  • Page 74 The SG510 recognizes and initializes the disk; no configuration is necessary. When the new disk is plugged in, the corresponding Disk Drive LED lights up to show that the drive is online. P/N 231-02833 Blue Coat SG510 Installation Guide page 74...

  • Page 75: Chapter 4: Option Cards

    HTTPS content. Additionally, the SSL proxy allows you to validate server certificates presented by various HTTPS sites at the gateway and offers information about the HTTPS traffic in the access log. P/N 231-02833 Blue Coat SG510 Installation Guide page 75...
  • Page 76 P/N 231-02833 Blue Coat SG510 Installation Guide page 76...

  • Page 77: Chapter 5: Troubleshooting

    SG510 is on, the Disk Drive LEDs (for as many disks as are installed) are on, and the LCD displays Blue Coat when starting up and then the LCD cycles between CPU utilization and proxied traffic statistics when the SG510 is running.

  • Page 78: The Initial Configuration Page Is Not Accessible

    Restore the appliance to its factory defaults (the Initial Configuration page is not accessible to an appliance that has already been configured). See “Resetting the SG510 to Factory Defaults” on page 81. P/N 231-02833 Blue Coat SG510 Installation Guide page 78...

  • Page 79: Creating A Static Route To The Sg510

    If the browser fails to connect to the SG510 successfully, complete the following steps to identify the problem. • Verify that you have the correct IP address and port for the SG510 in your Web browser (the default port is 8082). P/N 231-02833 Blue Coat SG510 Installation Guide page 79...

  • Page 80: A Security Warning Appears For The Initial Configuration Web Page

    If you move the SG510 from its original location or change the IP address for any reason, the SG510’s security certificate might not be accepted the next time you open the Management Console. P/N 231-02833 Blue Coat SG510 Installation Guide page 80...

  • Page 81: Resetting The Sg510 To Factory Defaults

    For information about creating a new certificate and editing the HTTPS-Console service, refer to the “Configuring HTTPS Termination” and “HTTPS Console (Secure Console)” sections of the Blue Coat ProxySG Configuration and Management Guide Suite. Resetting the SG510 to Factory Defaults When the SG510 is powered on and has booted up, but an initial configuration has not yet been performed, the Power LED flashes green and amber.
  • Page 82 The appliance performs a soft restart. The power LED turns amber during the restart. Wait until the reset is complete (about one minute) before trying to complete the initial configuration. Related CLI commands SGOS# restore-defaults factory-defaults P/N 231-02833 Blue Coat SG510 Installation Guide page 82...

  • Page 83: The Sg510 Does Not Come Back Up After Rebooting

    If the appliance is not coming back up after rebooting and the serial port is connected to terminal server (terminal concentrator) try the following: Open an active session on the terminal server, noting any traffic being outputted. Unplug the terminal server from the appliance. P/N 231-02833 Blue Coat SG510 Installation Guide page 83...
  • Page 84 P/N 231-02833 Blue Coat SG510 Installation Guide page 84...

  • Page 85: Appendix A: Specifications

    Memory (Speicher) SDRAM DDR333 Up to 2GB Hard Drives (Festplatte) IDE SATA 1.5Gb/s Network (Netzwerk) Two, on-board 10/100/1000 Base-T NICs (Network Interface Cards) Optional cards include the 1000B-SX MTBF 100,000 Hours P/N 231-02833 Blue Coat SG510 Installation Guide page 85...

  • Page 86: Environmental Specifications

    15% to 95% at 35 C (95 15% to 90% at 65 C (149 (non-condensing) (Relative Luftfeuchte) Maximum altitude up to 3000 meters 4.6 Km (15,000 ft) (up to 10,000 feet) (Hohe) P/N 231-02833 Blue Coat SG510 Installation Guide page 86...

  • Page 87: Appendix B:regulatory Statements

    Appendix B:Regulatory Statements Any modification to this product, unless expressly approved by Blue Coat Systems, Inc., could void the user’s authority to operate the equipment. Do not service the proxy yourself. If you have any questions, please contact Blue Coat.

  • Page 88: Class A Digital Warning

    Canadian EC EMC Warning This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la class A est conforme a la norme NMB-003 du Canada. P/N 231-02833 Blue Coat SG510 Installation Guide page 88...

  • Page 89: Australia/New Zealand Ec Emc Warning

    ATTENTION: Il y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie de meme type ou d’un type P/N 231-02833 Blue Coat SG510 Installation Guide page 89...

  • Page 90: Chinese Battery Warning Notification

    Entsorgung gebrauchter Batterien nach Angaben des Herstellers. Chinese Battery Warning Notification China CCC Notification Lasers Location of the laser apertures if any (Par. 6.1 3). Example: connectors for fiber optic component. P/N 231-02833 Blue Coat SG510 Installation Guide page 90...
  • Page 91 ± ¾ É è ± ¸ Î ª A ¼ ¶ ² ú Æ · ¡ £ Ô Ú ¼ Ò Ó Ã » · ¾ ³ Ï Â £ ¬ ± ¾ ² ú Æ · ¿ É Ä Ü µ ¼ Ö Â Î Þ Ï ß µ ç ¸ É È Å £ ¬ ¿ É Ä Ü Ò ª Ç ó Ó Ã » § ² É Ó Ã Ê Ê µ ± µ Ä ´ ë Ê © ¡ £ P/N 231-02833 Blue Coat SG510 Installation Guide page 91...
  • Page 92 P/N 231-02833 Blue Coat SG510 Installation Guide page 92...
  • Page 93 P/N 231-02833 Blue Coat SG510 Installation Guide page 93...

  • Page 94: Declaration Of Conformity

    EN 50024: 1998 Following the provisions of the 73/23/EEC and 89/336/EEC Directives, including the Amending Directive 93/68/EEC. Blue Coat Systems Model 510 Series is also in conformity with the following standard: Directive 2002/95/EC, Restriction of Hazardous Substances (RoHS). Sunnyvale, CA 94085...

  • Page 95: Appendix C:apéndice C: Declaraciones Regulatorias

    Cualquier modificación hecha a este producto, excepto con aprobación explícita de Blue Coat Systems, Inc., puede anular la autoridad del usuario para usar el equipo. No repare el proxy por su cuenta. Si tiene alguna pregunta, contacte a Blue Coat. Azul Coat Corporate 420 North Mary Avenue Sunnyvale, CA 94085-4121 \ 408.220.2200...

  • Page 96: Lasers

    Lasers Ubicación de las aberturas láser, si existen (Párr. 6.1 3). Ejemplo: conectores para componente de fibra óptica. P/N 231-02833 Blue Coat SG510 Installation Guide page 96...

  • Page 97: Appendix D:anhang D: Regulierende Anweisungen

    Appendix D:Anhang D: Regulierende Anweisungen Jede Veränderung dieses Produktes, welche nicht ausdrücklich von Blue Coat Systems, Inc genehmigt wurde, kann die Nutzungserlaubnis des Benutzers vernichten. Üben Sie die Bevollmächtigung nicht selbst aus. Wenn Sie Fragen haben, wenden Sie sich bitte an Blue Coat.

  • Page 98: Lasers

    Ersatz nur durch denselben oder einen vom Hersteller empfohlenen glelchwertigen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers. Lasers Lage der Laseröffnungen, falls vorhanden (Par. 6.1 3). Beispiel: Anschlüsse für Fiber Optic Komponenten. P/N 231-02833 Blue Coat SG510 Installation Guide page 98...

  • Page 99: Appendix E:simplified Chinese Regulatory Statements

    Appendix E:Simplified Chinese Regulatory Statements P/N 231-02833 Blue Coat SG510 Installation Guide page 99...
  • Page 100 P/N 231-02833 Blue Coat SG510 Installation Guide page 100...
  • Page 101 P/N 231-02833 Blue Coat SG510 Installation Guide page 101...
  • Page 102 P/N 231-02833 Blue Coat SG510 Installation Guide page 102...
  • Page 103 Appendix F:Traditional Chinese Regulatory Statements P/N 231-02833 Blue Coat SG510 Installation Guide page 103...
  • Page 104 P/N 231-02833 Blue Coat SG510 Installation Guide page 104...
  • Page 105 P/N 231-02833 Blue Coat SG510 Installation Guide page 105...
  • Page 106 P/N 231-02833 Blue Coat SG510 Installation Guide page 106...
  • Page 107 SG510, description of 8 front-panel PIN configuring 67 default proxy policy configuring 32, 58 disk drives IP address, setting and changing 25 inserting into the SG510 13 IP gateway, setting and changing 25 lever on 14, 72 Index Blue Coat SG510 Installation Guide...
  • Page 108 28 42, 50 power cord 16 configuring using a Web browser 31 power switch 16 configuring using the front panel 26 rack mounting 10 troubleshooting 77 using with the SG510 38–46 Index Blue Coat SG510 Installation Guide...
  • Page 109 47 troubleshooting 77 username CLI 64 configuring remotely 57 configuring using a serial terminal or PC 42, 50 configuring using a Web browser 31 default 25 warnings, automatic exit 23 Index Blue Coat SG510 Installation Guide...
  • Page 110 Index Blue Coat SG510 Installation Guide...

Table of Contents