Advertisement
Place cloth on the panel where you are working
S8
on to protect the panel. Continuously, wedge
your finger between the front bezel and the
panel, then pry up on the front bezel to
disengage the locking mechanism.
Work your way along the front bezel to disengage
all the locking mechanism.
4. Assembly and Disassembly Procedures (continued)
Unhook the key function board from rear bezel,
S9
disconnect the key function cable
Use a Hex-head screwdriver unscrewed 4 screws to
S10
release the DVI and D-SUB connectors
(No1~4Hex Nut screws
Size=M3x8;Torque=3~5KGFxCM).
2
Use a Phillips-head screwdriver unscrewed the
S11
No.1~2 screws to lease power plug
(No1~2 screw size=M3x10; Torque=3~5KGFxCM).
1
17
ACER X223W
Go to cover page
1
2
Hide quick links:
Advertisement
