Connecting A Computer Or Monitor - ViewSonic PA500S User Manual

Computer
Out
VGA to DVI-A cable
Audio cable
Audio
in
Video
connector
Audio Out

Connecting a computer or monitor

Connecting a computer
1. Take the supplied VGA cable and connect one end to the D-Sub output socket of the
computer.
2. Connect the other end of the VGA cable to the Computer 1 or Computer 2 signal
input socket on the projector.
3. If you wish to use the remote mouse control function, take a USB cable and connect
the larger end to the USB port of the computer, and smaller end to the Mini USB
socket on the projector. See
details.
Many notebooks do not turn on their external video ports when connected to a projector.
Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a
function key labeled CRT/LCD or a function key with a monitor symbol on the notebook. Press
FN and the labeled function key simultaneously. Refer to your notebook's documentation to
find your notebook's key combination.
Connecting a monitor
If you want to view your presentation close-up on a monitor as well as on the screen, you
can connect the Monitor Out signal output socket on the projector to an external monitor
with a VGA cable following the instructions below:
VGA cable
or
or
Audio cable
Video cable
"Using the remote PgUp/PgDn function" on page 7
14
Monitor
Computer
(for Component signal)
A/V device
(for selected models)
A/V device
Speakers
for