Bushnell Legend 98-1389/03-09 Instruction Manual page 5

FOCUSING
1. Adjust the interpupillary distance (Fig. 1) until you see a single circular
image.
2. The diopter adjustment ring is located directly below the right eyecup. To
unlock the diopter adjustment, pull the ring straight up (Fig. 2). This may be
easier if you twist the right eyecup up first (if you wear glasses, you can return
the eyecup to the down position after unlocking the diopter ring).
3. Make sure the diopter adjustment is set to "zero" (Index mark on diopter
Fig. 2
ring is lined up "0" on binocular). Keep both eyes open at all times.
Diopter Adjustment
4. Using the attached lens cap or your hand, cover the objective (front) lens
Ring Unlocked
on the right side of the binocular as you look into the eyepieces.
5. Using the center focus knob, focus on a distant object with fine detail (e.g.,
brick wall, tree branches, etc) until it appears as sharp as possible on the left
side.
6. Uncover the objective lens on the right side, and cover the left objective
lens while continuing to view the same object.
7. Rotate the unlocked diopter adjustment ring to bring the object into focus
in the right side of the binocular. Avoid over-turning or forcing the diopter
mechanism. If you are unable to bring the object into focus in the right side
Fig. 3
by adjusting the diopter ring, make sure the left side is still focused and that
Diopter Adjustment
Ring Locked
the center focus knob was not moved from its original setting. The diopter
adjustment only affects the right side.
5 5