Upgrading Software - Samsung UBD-M7500 Full Manual

Settings
6. The product detects the wired connection,
verifies the network connection, and then
connects to the network.
7. Press the
(OK) button.
Wired - Manual
Ğ
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
Follow Steps 1 through 3 in Wired - Automatic,
and then follow these steps:
1. Select Network Status. The product
searches for a network, and then displays the
connection failed message.
2. On the bottom of the screen, select IP
Settings, and then press the
The IP Settings screen appears.
3. Select the IP Settings field, and then press
the (OK) button.
4. Select Enter manually in the IP Settings
field, and then press the
5. Select a parameter to enter (IP Address, for
example), and then press the
Use the Up/Down buttons on the remote
control to enter the numbers for the
parameter.
Use the Left/Right buttons on the remote
control to move from entry field to entry field
within a parameter. When done with one
parameter, press the
6. Press the Up or Down button to move
to another parameter, and then enter the
numbers for that parameter following the
instructions in Step 5.
7. Repeat Steps 5 and 6 until you have filled in
all parameters.
| NOTE |
\ You can get the Network parameters from your
Internet provider.
8. When finished entering all the parameters,
select OK, and then press the
The product verifies the network connection
and then connects to the network.
(OK) button.
(OK) button.
(OK) button.
(OK) button.
(OK) button.
22
English

Upgrading Software

This menu allows you to upgrade the product's
software for performance improvements or
additional services.
• Never turn the product off or back on
manually during the update process.
1. In the Home screen, select Settings, and
then press the (OK) button.
2. Select Support, and then press the
button.
3. Select Software Update, and then press the
(OK) button.
4. To download update software and update
now, select Update Now, and then press the
(OK) button.
5. To let the product download update software
automatically when available, select Auto
Update, and then press the
See "Auto Update" in the next column for
details.
| NOTES |
\ The upgrade is complete when the product
turns off, and then turns on again by itself.
\ Samsung Electronics takes no legal
responsibility for any product malfunction
caused by an unstable Internet connection
or consumer negligence during a Software
Update.
\ If you want to cancel the upgrade while the
upgrade software is downloading, press the
(OK) button.
\ This option requires an Internet connection.
(OK)
(OK) button.