Table of Contents
Advertisement
3. Be sure to place the Thermomix Friend® on a clean, solid and even surface so that
it cannot slip. Keep sufficient distance between the appliance and the edge of the
surface.
4. Connect the Thermomix Friend® to the power supply.
5. Do not place the Thermomix Friend® on the power cord. If you do, it will not sit
evenly on the surface.
5.2
Cleaning for the First Time
CAUTION
Risk to health from production residues!
Production residues that may be present on the components of the
appliance are not suitable for consumption. Any production residues
can pose a risk to your health.
•
Before first use, thoroughly rinse all components and accessories
that could come into contact with food.
When cleaning the appliance for the first time, proceed as follows:
1. Disassemble the mixing bowl, see
2. Then wash all parts and accessories by hand or in the dishwasher (except for the
base unit).
Further information can be found in the instruction manual for your Thermomix®
TM6 or TM5.
If you do not have the instruction manual to hand, all manuals are available online at
https://thermomix.vorwerk.com.
6
Settings
6.1
Adjusting the Mixing Bowl Detector
You can use the Thermomix Friend® with either the TM6 mixing bowl or the TM5
mixing bowl.
The Thermomix Friend® is configured for the mixing bowl of the Thermomix® TM6 as
standard. The mixing bowl detection switch is located on the underside of the
Thermomix Friend®.
Setting the mixing bowl detection switch to TM5
NOTE
Risk of damage from improper use!
If you change the setting of the mixing bowl detection switch during
operation, the base unit and mixing bowl could get damaged.
•
Make sure that the device is correctly switched off and
disconnected from the power supply before changing the mixing
bowl detection setting.
Thermomix Friend®
Cleaning the Mixing Bowl
[} 20].
15
Advertisement
Table of Contents
