Introduction; Specification - UltraPower UP400AC Duo Instruction Manual

INTRODUCTION

Thank you for purchasing UP400AC DUO charger by Ultra Power. This
product is a rapid charger with a high performance microprocessor and
specialized operating software. Please read this entire instruction
manual completely and attentively before using this product, as it
covers a wide range of information on operation and safety.
UP400AC DUO Specification
Input voltage
Charge/Discharge Power
Charge/Discharge Current
Balance Current
LiIo/LiPo/LiFe cell count
NiCd/NiMH battery cell count
Pb battery voltage
Battery data memory
Weight
Dimension
Intelligent Power Control:
1. The output power base on the principle of Channel 1+Channel
2=400Watt.
2. If only one channel is used, the output power come from channel 1
can approach to Max. 400 watt, channel 2 can approach to Max. 200
watt.
3. If both channels are used, the output power of channel 1 equals 400
watt minus output power of channel 2, (CH1 power=400Watt-CH2
power).
4. Start channel 2 while channel 1 is using fully 400Watt, the output
power of channel 1 will be reduced accordingly.
AC 100-240V,
DC 11.0-18.0V
Max. 400W/40W (CH1)
Max. 200W/25W (CH2)
0.1-20A/0.1-8A (CH1)
0.1-12A/0.1-5A (CH2)
600mA/cell (CH1)
300mA/cell (CH2)
1-6 series
1 - 15cells
2V-20V (1-10cells)
up to 10 data
2.4kg
244*199*76mm
4