Page 5
Step 1: Use 5/16´´ x 3 ½´´ bolts (A) to attach the legs (1) to the leg bases (2). Each part has a series of numbers that indicate where to attach the part with the corresponding number. 5/16´´ X 3 ½´´ Bolts Step 2: Attach the diagonal supports (3) to the legs with 5/16’’...
Page 6
Step 3: Use 5/16´´ x 3 ½´´ bolts (A) to attach the supports (4) to the legs. Each part has a series of numbers that indicate where to attach the part with the corresponding number. 5/16´´ X 3 ½´´ Bolts Step 4: Attach the knee Braces (5) to the legs and to the supports with 5/16´´...
Page 7
Step 5: Use 3´´´Deck Screws (C) to attach the top supports (6) to the supports. Each part has a series of numbers that indicate where to attach the part with the corresponding number. 3´´ Deck Screws Step 6: Finally, attach the Ladder Bar (7) to the legs with ½´´ x 8´´ bolts (D). Each part has a series of numbers that indicate where to attach the part with the corresponding number.
Page 8
This completes the Sheldon´s Monkey Bar Assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't hesitate to call us (866 332 2403) or email us. We are here to support you. P| 7 Sheldon´s Monkey Bars www.ForeverRedwood.com...
Need help?
Do you have a question about the SHELDON'S MONKEY BARS and is the answer not in the manual?
Questions and answers