Related Manuals for Forever Redwood RORY'S BIG PLAYGROUND SWING SET
Summary of Contents for Forever Redwood RORY'S BIG PLAYGROUND SWING SET
- Page 1 866.332.2403 (TOLL FREE); 7am – 7pm Pacific Time, Monday-Saturday ASSEMBLY INSTRUCTIONS FOR THE RORY´S BIG PLAYGROUND SWING SET...
- Page 2 P| 1 RORY’S BIG PLAYGROUND SWING SET www.ForeverRedwood.com...
- Page 3 P| 2 RORY’S BIG PLAYGROUND SWING SET www.ForeverRedwood.com...
- Page 4 P| 3 RORY’S BIG PLAYGROUND SWING SET www.ForeverRedwood.com...
- Page 5 Note: The structure must be assembled on its side, as shown. Step 1: Open the frame legs (1) as shown. Each part has a series of numbers that indicate where to attach the part with the corresponding number. Separate P| 4 RORY’S BIG PLAYGROUND SWING SET www.ForeverRedwood.com...
- Page 6 Step 2: Pull out the cross support and line up to match the predrilled hole. After that, use 3/8´´ X 10´´ Bolts (A) with washer and nut to secure in place. 3/8´´ X 10 Bolts Step 3: Use 3/8´´ X 10´´ Bolts (A) with washer and nut to attach the lower main support (2) to the frame legs. Each part has a series of numbers that indicate where to attach the part with the corresponding number.
- Page 7 Step 4: Put the 3/8´´ x 6 ½´´ bolts (B) with washer and nut as shown. Each part has a series of numbers that indicate where to attach the part with the corresponding number. 3/8´´ X 6 ½´´ Bolts Step 5: Place the frame legs in their site. Each part has a series of numbers that indicate where to attach the part with the corresponding number.
- Page 8 Step 6: Put the Quick Links (H) and the Springs (G) in the hangers. After that, put the chains (F). Take a few minutes to adjust the chain height to your preference. Each part has a series of numbers that indicate where to attach the part with the corresponding number.
- Page 9 Step 8: Pull out the cross supports and line up to match the predrilled hole. After that, use 3/8´´ X 10´´ Bolts (A) with washer and nut to attach. 3/8´´ X 10´´ Bolts 3/8´´ X 10´´ Bolts P| 8 RORY’S BIG PLAYGROUND SWING SET www.ForeverRedwood.com...
- Page 10 Step 9: Attach the connector timbers (4) to reinforce the connection between the frame legs and the main structural timber. Use 3/8´´ x 7´´ bolts (D) with washer and nut to attach. Each part has a series of numbers that indicate where to attach the part with the corresponding number.
- Page 11 Step 11: Use quick links (H) to joining the wooden seats to the chains (F). Each part has a series of numbers that indicate where to attach the part with the corresponding number. Quick Link Step 12: Finally, with a couple of people helping, turn the swing right side up. P| 10 RORY’S BIG PLAYGROUND SWING SET www.ForeverRedwood.com...
- Page 12 This completes the Playground Swing Set assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't hesitate to call us (866 332 2403) or email us. We are here to support you. P| 11 RORY’S BIG PLAYGROUND SWING SET www.ForeverRedwood.com...
Need help?
Do you have a question about the RORY'S BIG PLAYGROUND SWING SET and is the answer not in the manual?
Questions and answers