Advertisement
Quick Links
Fountain Components
Image
Item Description
M-Series Escala
Fountain Water
Feature
M-Series Escala
Fountain Basin
M-Series
Artifact
Fountain Pump
Cover
FT-162 M-Series Escala Fountain
Fountain Information:
• This fountain holds approximately 1.5 gallons of water.
• A fountain cover is not available for this fountain.
• No refill device or submersible lights are suggested for this fountain.
Pump Information:
WP450LV - 120 GPH Low Voltage Pump (16 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Scissors
Component
Quantity
Item #
FT-162A
1
FT-162C
1
FT-190B
1
Assembly Instructions
Pump Kit Parts List
Image
Component
PK120-LV Pump with Transformer
#7 Stopper
2" length of PermaGum Putty
Approx. 6" length of 1/2" black
non-kink tubing
1" length of 5/8" clear tubing
1" length of 1/2" CPVC pipe
Adhesive Dots
Hose Clamps
Proudly
MADE IN USA
Quantity
1
1
1
1
1
1
4
1
rev 3/30/2020
Advertisement
Related Manuals for Campania International Escala FT-162
Summary of Contents for Campania International Escala FT-162
- Page 1 FT-162 M-Series Escala Fountain Assembly Instructions Fountain Information: • This fountain holds approximately 1.5 gallons of water. • A fountain cover is not available for this fountain. • No refill device or submersible lights are suggested for this fountain. Pump Information: WP450LV - 120 GPH Low Voltage Pump (16 ft.
- Page 2 FT-162 M-Series Escala Fountain Assembly Instructions Fountain Set-Up: Assembly & Installation - A fountain can be diffi cult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin. Step 1 - Seek Professional Help: Check if professional installation is recommended for your fountain.
- Page 3 FT-162 M-Series Escala Fountain Assembly Instructions Step 7 - Place the pump house (FT-190B) over the pump and centered inside of the basin (FT-162C). FT-190B (4 lbs) 6"L X 6"W x 3.5"H Step 8 - Holding the water feature (FT-162A) over the pump house (FT-190B), insert the CPVC end of the tubing into the coupling protruding from the bottom.
- Page 4 Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.