Campania International Beauvais FT- 167 Assembly Instructions

NOTE: Component photos are not to scale
Tools you will need
Level
4mm Allen wrench (included)
All of our cast stone is proudly
FT- 167 Beauvais Fountain
(6 pieces)
COMPONENTS AND PARTS LIST
FT-167A
17"dia x 10.75" H
42 Lbs
FT-167C
5"L x 3" W x 4.75" H
5 Lbs
FT-167B
9"sq x 10.75" H
33 Lbs
FT-154B
9.5"sq x 8.25" H
28 Lbs
FT-154C
5.75"L x 1"W x 5"H
3 Lbs
FT-154D
40.25" x 9.75" H
320 Lbs
Pump Kit Parts List
PK500 pump (1)
#10 compression stopper (1)
Approx. 6" length of 1/2" black non-kink tubing (2)**
Approx. 2" length of 5/8" clear vinyl tubing (2)**
Approx. 6" length of 1/2" black non-kink tubing (1)**
**Tubing will be preassembled with T-connector
Approx. 11" length of 1/2" black non-kink tubing (1)
Approx. 2" length of 5/8" clear vinyl tubing (2)
1/2" x 1/2" x 1/2" T Connector (1)
Approx. 2 ½" of ½" copper pipe (1)
Approx 3 ½" length of ½" copper pipe (1)
1/2" copper coupling (2)
½" copper elbow (1)
Wedges (4)
4mm Allen wrench (1)
Hose clamps (9) Note – Hose clamp to be used as
flow restrictor if necessary
Fountain holds approximately 15 gallon(s) of water
This fountain takes cover – FTNCOV-MED
Connect the 1/2" non-
kink tubing to the
pump water outlet.
Revised August 21, 2013