Subscribe to Our Youtube Channel
Related Manuals for Tanda TX7100
Summary of Contents for Tanda TX7100
- Page 1 TX7100 Intelligent Addressable Optical Smoke Detector Installation and Operation Manual TANDA UK Technology Copyright ©2015, All right reserved.
- Page 2 For more information please visit the website at www.recyclethis.info EN54 Part 7 Compliance TX7100 Intelligent Smoke Detector complies with the requirements of EN 54-7:2000. EN54 Standard Conformity Information 0832 TANDA(UK) LIMTIED...
-
Page 3: Table Of Contents
TX7100 Intelligent Optical Smoke Detector Installation & Operation Manual Table of Content 1 Introduction ................................4 1.1 Overview ................................. 4 1.2 Feature and Benefits ............................. 4 1.3 Technical Specification ..........................4 2 Installation ................................5 2.1 Installation Preparation ..........................5 2.2 Installation and Wiring .......................... -
Page 4: Introduction
1 Introduction 1.1 Overview The TX7100 Intelligent Addressable Optical Smoke Detector is the ideal device for most applications, due to its spiffing linear response to a wide variety of different types of smoke patterns. The unit manufactured the sensitivity requirement of EN 54 part 7, European Standard. The unit is aesthetically pleasing with unobtrusive design that will complement modern building designs. -
Page 5: Installation
BS 5839 Part 1 and EN54. The TX7100 Optical smoke detectors operate on the principle of infra-red light refracting off smoke particles entering the chambers. This makes detector more sensitive to smouldering fires such as modern fabric or furnishing. -
Page 6: Detector Configuration
TX7100 Intelligent Optical Smoke Detector Installation & Operation Manual 3 Detector Configuration 3.1 Preparation The TX7930 handheld programmer is used to configure smoke detectors soft address and parameter. This tools are not included, must be purchased separately. The programmer is packed with twin 1.5V AA battery and cable, ready for usage once received. -
Page 7: Read Configuration
TX7100 Intelligent Optical Smoke Detector Installation & Operation Manual Parameter Description LED On (Default) 1. Read Parameter: 1 LED Off 2. Write 3. R/W Config 4. Set Success Figure 7 Figure 8 5. Press “Exit” key to go back Main Menu. Press “Power” to switch off the programmer. -
Page 8: Cleaning
TX7100 Intelligent Optical Smoke Detector Installation & Operation Manual 4.1 Cleaning 1. Remove the detector cover by snooping away the four sides tabs using a flat screw driver and then pulling the cover from the base. (Figure 11). 2. Remove the protective screen by pulling it straight out. -
Page 9: Limitation Of Smoke Detectors
TX7100 Intelligent Optical Smoke Detector Installation & Operation Manual Appendix 1 Limitation of Smoke Detectors The smoke detector is designed for triggering and initiating emergency fire equipment, however it only functions when matching with other equipment’s. Installation of this smoke detector must conform to electrical codes and country standards.
Need help?
Do you have a question about the TX7100 and is the answer not in the manual?
Questions and answers